Blackbird Surf 75

Blackbird Surf

  • Artnr: 09-00108

Beskrivelse av artikkelen

INTRODUCTION

A very efficient foil for Surf, Wing, and/or Windfoil.

The carbon front wing features a generous surface area, which creates superb lift into flight mode, even at lower speeds. A shorter fuselage creates excellent maneuverability and very fluid performance in the surf. The 75 cm mast provides a lower center of effort for a more controlled flight.

Get going quickly and keep riding with the Blackbird Surf 75.

Delivered with: Transport bag, fittings and Torx tool.

SPECIFICATONS

MODEL NAME FRONT WING BACK WING FUSELAGE MAST CONNECTOR
Alu 75 1600 cm2 Carbon 310 cm2 Carbon 65 cm Alu 75 cm Alu

Double rails / Tuttle / Power

Blackbird Front Wing 1600 cm2

Carbon front wing addresses the needs of foilers who want to get going in low to medium winds. The generous area combined with the 940 mm width keeps you flying at low speeds, and it turns on a dime. However, you can still push it on those faster downwinders without losing control.

Material // Carbon

Wingspan //  940 mm

Chord Width // 200 mm

Chord Thickness // 26 mm

Area // 1600 cm2

Aspect Ratio // 4:7

Screws // 3 x M8 28 mm

Blackbird Rear Wing 310 cm2

Engineered with a flat profile combined with an 85 mm chord, the 310 cm2 Carbon Rear Wing gives ideal performance in the waves and on the flat. The adjustable fin slots allow you to tune the back stabilizer for either more lift or higher speed.

Material // Carbon

Wingspan //  480 mm

Chord Width // 85 mm

Chord Thickness // 8 mm

Area // 310 cm2

Aspect Ratio // 5:6

Screws // 2 x M8 21 mm

Fuselage 65 cm

The Blackbird Alu Fuselage seamlessly connects to any size wings in the Simmer Style range. The fuselage is manufactured from lightweight and extremely strong CNC machined high-grade aluminum, which is anodized for maximum longevity. The short length creates excellent maneuverability and a very fluid performance in the surf.
Fittings to the mas// 2 x M8 30 mm

Aluminum Mast 75 cm

The Blackbird Aluminium mast provides an extremely strong connection between your board and your wings. The mast is manufactured from light-weight and extremely strong CNC machined high-grade aluminum, which is anodized for maximum longevity. The mast is compatible with both the Double Rail Plate and the Deep Tuttle connection.

Double Rail Base Plate

The Blackbird Surf Foil comes standard with a Double Rail Plate. But the mast can be fitted with several options to connect with the board including Tuttle and Deep Tuttle. All versions are securely fastened to the mast using three M8 45 mm flathead screws. The base plate is machined out of solid blocks of high-quality aluminum using CNC techniques to ensure that the geometry of the connection is perfect.